Q: I have a song where we recorded an acoustic guitar first then did the drum tracks later and so on. Before I recorded the drum tracks, I should have fixed the tempo problem first. Can I still fix this problem? (Even after using elastic audio to move some drum hits around?) I don’t work in grid mode or tick base settings for the most part. I know that this needs to change some day. Do you use beat detective?

A: OK, There’s 2 ways I can see going with this.

Way 1) Use Beat Detective to correct specific sections of the song, Say a bad fill for example Beat Detective is good with small sections. and is good for fixing a specific timing problem, but may still not work great if the tempo is all over the place or not defined for the entire song.

Way 2) Go the long way and create a tempo map of the entire song. Allowing you to use Elastic audio on any recorded tracks with more control over changing the actual tempo of the song. This is what I have been doing to fix parts because ultimately everything is much easier to edit in a grid mode once the tempo work is there. Also, Overdubbing new parts might be easier since you’ll be able to use a click track that will correspond to the tempo.

• Perform a SAVE AS at this point, so you can experiment without losing your current place. Creating the Tempo Map involves identifying bars and beats. Start by identifying bar 1. This could be tricky if you have any tracks set to Ticks. You may need to set them back to Samples before Identifying bar 1.
• Next identify Bar 2. This will set the Start tempo of the song. Now create a click track. This will help you by indicating when the tempo is changing and then go through the whole song identifying bars as you go whenever the click track gets off time. Each time you identify a bar, it will adjust the tempo map. Pic 1 shows where the Identify beat command is and also shows you my session, where I’ve gone through and done exactly that. Notice how the Tempo is identified, it’s all over the place. Kicks and snares are good places to identify beat. (Beat Detective can do this too, but I find it very tedious for an entire song)

• 
• Next, Change any Sample based tracks to tick based. Then pick the elastic type for ALL TRACKS - be sure your drum tracks are all grouped. Don’t leave any tracks out because they won’t be adjusted when you change tempo. Then I’ll mess around with the Tempo Operations window.
• In pic 2, I’m selecting 2 bars to apply a tempo change to.

This should go a long way to fixing any tempo issues. I don’t normally quantize things after all this, but often manually adjust or move warp markers using Grid mode. — Hope this helps.

Learn how to record all of the moves you make in Live for later editing and export.

Get the Flash Player to see this player.